Filling loop for use where boilers only have a digital pressure gauge.
Can be installed remotley, for example if the boiler is in the attick or other inaccessible place, filling loop can be positioned in a more convenient location.
The Romote Filling Loop is used to fill and pressurise domestic central heating systems or in apartment blocks to fill and pressurise the secondary heating systems of Heat Interface Units.
The Filling Loop Contains the following items:
After the system has been filled and pressurised the service valves must be closed and the flexible hose disconnected and stored in a convenient and suitable place until it is required again.
The remote5 filling loop consists of a double check valve, a flexible hose with union connectors, sealing washers and a ball isolating valve with 4 bar pressure gauge.
The pressure gauge measures the pressure in the heating system and is especially useful when installed away from the boiler or when the boiler of HIU does not have an integral pressure gauge. Once the system is full and vented the flexible hose must still be removed as per the regulations.
Max Inlet Pressure: 10 bar
Min Inlet Pressure: 0.1 bar
Max continuous temperature: 85°c
Double Check Valve conforms to: BS EN 13959