Due to the Coronavirus (COVID-19) pandemic we are suspending deliveries with Royal mail, therefore all deliveries will be sent out by Parcelforce.
Our cutoff times for courier deliveries has is now 12pm instead of 2pm as Parcelforce are now collecting off us much earlier.
Trade Counter opening times are now as follows until further notice:
Proven technology to guarantee central heating system protection
MagnaClean® Professional sets an industry standard for plumbing and heating engineers when it comes to protecting and maintaining both new and existing heating systems.
In an age of advanced and high efficiency gas and oil boilers there has never been a greater need to safeguard what amounts to one of the most expensive investments in the modern home - the central heating system.
Even a small build-up of iron oxide in a standard or modern efficiency boiler results in substantial efficiency loss and fuel wastage. So, not only does the system perform inadequately, it also costs more to run and maintain.
MagnaClean Professional is a proven, high efficiency, full-flow magnetic filter designed to tackle all central heating systems removing virtually 100% of the suspended black iron oxide. The benefits of this simple technology are immediate:
Simple installation and effortless servicing saving time and money
Immediate results and system protection following installation
No ongoing running costs
Quick and easy chemical dosing
MagnaClean® Professional – How It Works
Modern central heating systems with high efficiency boilers are clean, efficient and economical, but ONLY if operating at peak performance. The natural process of black iron oxide build–up soon impairs performance and eventually clogs the boiler and radiators.
The majority of systems suffer from black iron oxide contamination. This creates thick sludge deposits that are the result of corrosion taking place within radiators and other metallic components. The oxide particles range from very large to sub-micron with the latter leeching into the system water continuously during use.
Installing MagnaClean Professional to a new or existing central heating system is simple. It comes with purpose designed triple sealed valves, which allow 360° rotation. Also included is a spanner for lid removal and a custom made spanner for easy valve operation. Servicing is a two minute job. Simply remove and wash the filter’s sheath at the annual boiler service.
Another advantage to MagnaClean Professional is the ‘Pro-Fill’ air vent built in to the lid. The specialist design Pro-Fill vent incorporates a unique one-way valve, allowing the installer to inject any chemical or acid agent directly into the MagnaClean without the need to isolate anything on the system. Just simply remove the Pro-Fill air vent screw, inject the chemical and once complete replace the screw.
MagnaClean® Professional 22mm Specification
Canister and Lid
• Material: Glass fibre reinforced nylon
• Volume: 0.55 litres
• BSI Tested: To BS EN483:2000 Class 1
• Inlet diameter: 22mm at valve
• Outlet diameter: 22mm at valve
• Thread: Pressure thread
• Housing: 316 stainless steel
• Length: 150mm
• Diameter: 25mm
• Maximum capacity: 290 grams wet sludge. Enough capacity for one year following a system flush.
• Temperature rating: 150 °C
• Body material: Nickel plated brass
• Screw material: Nickel plated brass
• Retainer material: Nickel plated brass
• Ball material: 316 stainless steel
• Spring material: 316 stainless steel
• Outer hex: 17mm
22mm Inlet and Outlet Valves
• Body material: Nickel plated brass
• Seals material: Longlife P.T.F.E.
• O rings material: Twin shaft in Nitrile 70 and extra packing gland
• Thread: 22mm